3. The “V-Chip” screen will appear.
Press the ▲ or ▼ button to select “Change PIN”, then press the ENTER
button. The Change PIN screen will appear. Choose any 4 digits for your
PIN and enter them. As soon as the 4 digits are entered, the “Conrm new
PIN.” screen appears. Re-enter the same 4 digits. When the Conrm screen
disappears, your PIN has been memorized.
Press the EXIT button to exit.
If you forget the PIN, press the remote-control buttons in the following
sequence, which resets the pin to 0-0-0-0 : Power Off. → Mute → 8 → 2
→ 4 → Power On.
How to Enable/Disable the V-Chip
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER
button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3. The “V-Chip” screen will appear.
To enable the V-Chip feature, press the ENTER button so that the “V-Chip
Lock” eld is “On”. (Pressing the ▲ or ▼ button will alternate between “On”
and “Off”.)
Press the ENTER button.
Press the EXIT button to exit.
➣
Change PIN
Enter new PIN.
Return
0~9
Enter PIN
Confirm new PIN.
V-Chip
V-Chip Lock : Off
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN ►
ReturnEnter
Move
Setup
Cable Network Setup
Wireless Network Setup
V-Chip ►
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
V-Chip
* *
Enter PIN
*
Return
0~9
Enter PIN
V-Chip
V-Chip Lock : Off ►
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
ReturnEnter
Move
V-Chip
V-Chip Lock : Off
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
ReturnEnter
Move
Off
On
To Next Page
Loading...
