SLB-10A by using the SAC-47 KIT
which consists of the AC adapter (SAC-47) and the USB cable (SUC-C3).
When the SAC-47 and SUC-C3 are combined, they can be used as an AC
cable.
Using an AC cable
: Connect the AC adapter(SAC-47) to the
USB cable. It can be used as a power
cable.
x
Using a USB cable
: Remove the AC adapter (SAC-47).
You can download stored images to your
PC (p.81) or supply the power to your
camera through the USB cable (SUC-C3).
x
Important information about USB cable usage.
Use a USB cable (SUC-C3) with the correct specifi cation.
If the camera is connected to the PC through a USB hub: connect
the camera directly to the PC.
the camera and other devices are connected to the PC at the same
time : remove other device.
If the USB cable is connected to a port located on the front of the
PC : remove the cable and connect it to a port located on the back
of the PC.
If the USB port of the PC doesn’t meet the Power output
standard(4.2V, 400mA), the camera may not be charged.
x
x
x
x
x
To Next Page
Loading...
