23
1. Introduction
Control panel overview
This control panel may differ from your machine depending on its model.
There are various types of control panels.
12
M267xN/M287xND/M287xDW
1 ID Copy Allows you to copy both sides of an ID card like a
driver’s license on a single side of paper (see "ID card
copying" on page 61).
2 Scan to Switches between scan and copy mode. The Scan to
LED turns on scan mode and turns off on copy mode.
3 Display screen Shows the current status and displays prompts during
an operation.
4 Left/Right Arrows Scrolls through the options available in the selected
menu and increases or decreases values.
5 Menu Opens Menu mode and scrolls through the available
menus (see "Accessing the menu" on page 31).
6 OK Confirms the selection on the screen.
7 Stop/
Clear
Stops an operations at any time.
8 Power/
Wake Up
Turns the power on or off, or wakes up the machine
from the power save mode. If you need to turn the
machine off, press this button for more than three
seconds.
9 Start Starts a job.
10 Power
Saver
Goes into power save mode.
11 Back Sends you back to the upper menu level.
12 Status LED Indicates the status of your machine (see
"Understanding the status LED" on page 105).
13 Eco Turn on Eco mode to reduce toner consumption and
paper usage (see"Eco printing" on page 55).
To Next Page
Loading...
