58
2. Menu Overview and Basic Setup
Basic copying
• For special printing features, refer to the Advanced Guide (see "Copy
menu" on page 208).
• Accessing menus may differ from model to model (see "Accessing the
menu" on page 31 or "Control panel overview" on page 23).
• Depending on models or options, some menus may not be supported
(see "Features by model" on page 7).
15
Basic copy
1
Select (copy) > (Menu) > Copy Feature on the control panel.
Or select (Menu) > Copy Feature on the control panel.
2
Place a single document (see "Loading originals" on page 49).
3
If you want to customize the copy settings including Reduce/Enlarge,
Darkness, Original, and more by using the control panel buttons (see
"Changing the settings for each copy" on page 59).
4
Enter the number of copies using the arrow or number keypad, if
necessary.
5
Press (Start).
If you need to cancel the copying job during the operation, press (Stop/
Clear) and the copying will stop.
To Next Page
Loading...
