Samsung MAX-ZB450 - Disc and Track Selection

11
You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the... Press the and ...
Next track Press
once
Current track Press
once
Previous track Press
twice
Track of your choice The appropriate number of
pressing the and .
The CD function is automatically selected when Disc Skip is
pushed.
To select a specific disc, press the corresponding Disc (1, 2, 3) button
on the front panel or Disc Skip on the remote control, until the
required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
If you wish to play the current disc only, press Repeat on the
front panel one or more times, until 1 CD is displayed.
If you use the Disc (1, 2, 3) function when listening to the
radio or to a tape, the system switches automatically to the
CD mode.
If the disc selected is not loaded, the next disc is played
automatically.
Selecting a CD in the Disc changer
Selecting a CD Track
Press the Track/Album button, then select ‘Title(Album)’ or ‘Track’ and
press the , button.
To move the title(Album),
If ‘Title’ is selected,
press the , button.
To move the track,
If ‘Track’ is selected,
press the , button.
Moves the track within the title.
If the , button is pressed
more than the number of tracks
within the title, it moves to the next title.
The title and track of the MP3-CD desired to listen may be
selected on stopping or during playbacks.
To select the MP3-CD title and
track
Main Unit
Press the Tune/CD Mode button, then select ‘‘Title(Album)’’ or ‘Track’ and
press the , button.
If ‘Title’ is selected in the display, the title moves.
If ‘Track’ is selected in the display, the track moves.
Remote Control
2
3
1
3
1
2
Title Movement
Track Movement
GB
MAX-ZB450 GB R-1~16 5/9/03 11:41 Page 11