The printer has three buttons: Toner Save, Cancel/Reprint and Demo.
Demo
Clean the inside of the printer
Press and hold Demo for about 2 seconds until the
control panel lights blink slowly to print a demo page.
The printer must be in the Ready mode.
Press and hold Demo for about 10 seconds until the
control panel lights remain lit. After cleaning the
printer, one cleaning sheet prints. For further
information, see page 6.5.
Print demo page
Start manual feeding
When you select Manual for Paper Source from your
software application, you should press Demo each
time you load a sheet of paper manually. For further
information, see “Using the Manual Input tray” on
page 4.5.
Control Panel Buttons
To Next Page
Loading...
