4.6
PRINT MEDIA
3
When you print a document, you must
select Manual for Paper Source from
the software application, and then select
the correct paper size and type. For
details, see page 5.3.
4
Press Demo to start feeding.
5
Print the document.
6
If you are printing multiple pages, load
the next sheet after the first page prints
out.
7
Press Demo to start feeding.
Notes:
• The face-up output slot may not hold the printed pages properly.
• The printed pages will not stack in the face-down output tray unless you change output lever position.
After you finish using the face-up output slot, you must change the position of the output lever to the
normal position by pushing it up.
2
Push the output lever down to open the
face-up output slot.
To Next Page
Loading...
