6.5
M
AINTAINING YOUR PRINTER
3
Your printer automatically picks up a sheet of paper from the
tray and prints out a cleaning sheet with the dust or toner
particles on it.
5
Plug in the power cord, and turn the printer on.
Note: The cartridge
cleaning process takes
some time. To stop the
printing, turn the power
off.
Printing a cleaning
sheet
If you are experiencing blurred, faded or smeared printouts.
Printing a cleaning sheet cleans the drum inside the toner
cartridge. This process will produce a page with toner debris,
which should be discarded.
1
Insure the printer is turned on and in the ready mode with
paper loaded in the automatic input tray.
2
Press and hold down Demo on the control panel for about ten
seconds until all control panel lights remain lit, then release.
4
Reinsert the toner cartridge and close the cover.
To Next Page
Loading...
