7.22
PROBLEM SOLVING
When the printer detects an error, the control panel indicator lights will indicate error
messages. Find the light pattern below that matches the printer light pattern and follow the
solutions to clear the error.
Troubleshooting Error Messages
Printer Light Patterns
Light status legend
symbol for “light on”
• Check the power cord and the power switch if your printer does not
generate a response.
• Make sure that the printer is powered with the specified AC voltage.
Power off
The printer is out of paper in the paper tray. The Paper light blinks until
paper is added.
• Loading paper into the tray will cancel this message and allow you to
continue with the print job.
Paper out
symbol for “light blinking”
symbol for “light off”
To Next Page
Loading...
