2.9
S
ETTING UP YOUR PRINTER
1
Plug the power cord into the power
receptacle on the back of the printer.
2
Plug the other end into a properly
grounded AC outlet.
3
Turn on the power.
Turn on the Printer
➞ To AC outlet
As the printer powers up, all the printer
control panel lights turn on briefly. When
only the Data light remains on, press and
hold the Demo button.
Hold the Demo button down until all the
lights blink (for about 2 seconds) and
then release. The demo page will print.
Laser Beam Printer
Excellent Performance, High quality
Robust Network connectivity
ML-1450 Series
The demo page provides a sample of the
print quality to help you verify that the
printer is printing correctly.
Print a Demo Page!
To Next Page
Loading...
