F.5
P
RINTER OPTIONS
Network Interface Card
Review the precautions on page F.1 and then follow this procedure to install the Network card
option in your printer.
1
Unpack the network printer card. You
should find the following items.
3
Turn the printer power off and unplug all
cables from the printer.
4
Remove the two screws on the back of
the printer, then remove the control
board cover. See the figure on page F.2.
5
Remove the two screws, then remove
the plate.
Network card
(PortThru)
User’s guide
CD-ROM
(SyncThru)
Brackets Screws
2
Two brackets come with the network
card. Select the long bracket and attach
it to the network card with two screws
provided.
To Next Page
Loading...
