F.7
P
RINTER OPTIONS
Paper Tray 2
You can increase the paper handling
capacity of your printer by installing the
optional Tray 2. The optional paper tray
consists of two components; the support
unit and paper tray.
1
Turn off the printer and unplug all cables
from the printer.
2
Observe the location of the support
unit’s connector and tabs.
3
Align the printer with the support unit
and lower it into place on the tabs and
connector.
4
Load paper in Tray 2. For information on
loading paper in the tray, see page 2.5.
support unit
Label
tap
tap
connector
Note: Be sure you check the label before
using the optional Tray 2. (For use
with ML-1450 Series only)
paper tray
To Next Page
Loading...
