3.3
U
SING THE CONTROL PANEL
Control Panel Light Message
The Data light is on and the printer is ready to print.
No action is needed. If you press and hold the Demo
button for about 2 seconds, a demo page will print. If
you press and hold the button for about 6 seconds, a
configuration sheet will print.
Ready Mode
Control Panel Lights
The control panel lights indicate the status of your printer. If the Error light is
on, the printer is experiencing an error. See “Troubleshooting Error Messages”
on page 7.22.
symbol for “light on”
symbol for “light blinking”
symbol for “light off”
Light status legend
To Next Page
Loading...
