ED:2010-04-08 Samsung Eletronics
13
• Code:M2-1211
• Error message:
SMART PANEL:
• Symptom/Cause:
1. Paper has jammed. (In case that the printer has turned on after turned it off for printing job or pick-up.)
• Trouble Shooting Method:
1. Open the top cover. Check if the paper has jammed. If there is the jammed paper, remove it.
2. If the error message in Smart Panel is not disappered, check the Regi sensor and actuator. If they are
defective, replace them.
To Next Page
Loading...
