S
ETTING
U
P
Y
OUR
P
RINTER
2.17
2
Removing Printer software
1
From the Start menu, select Programs.
2
Select Samsung ML-1750 Series, and then Samsung
ML-1750 Series Driver Maintenence.
3
The Samsung ML-1750 Series Driver Maintenance window
appears. Check Remove and then click Next.
4
When you are asked to confirm your selection, click OK.
The Samsung ML-1750 Series printer driver and all of its
components are removed from your computer.
5
When removing is completed, click Finish.
Changing the Display Language
After installation of the software, you can change the display
language. If you installed the Remote Control Panel or the
Status Monitor, the selected language is applied to them.
1
From the Start menu, select Programs.
2
Select Samsung ML-1750 Series, and Language
Selection.
3
Select the desired language from the language selection
window, and click OK.
To Next Page
Loading...
