P
RINTING
T
ASKS
4.7
4
Make sure that
Source
is set to the
corresponding paper tray.
Manual Feed source is used when you use
the Manual Feeder to print using special
materials. You have to load one sheet at a
time into the the printer. see page 3.8.
If the paper source is set to Auto Select,
the printer automatically selects paper
from the Manual Feeder first and then from
the Tray.
Make sure the Type is set to Printer
Default. If you load a different type of
print materials, select the corresponding
paper type. For further information on print
materials, refer to chapter 3 "Using Print
Materials".
If you use cotton paper, set the paper type
to
Thick
for the best printing.
Property Description
➂
➃
To Next Page
Loading...
