P
ROGRAMME
I
NSTALLING
P
RINTER
O
PTIONS
F.3
F
Installing Memory and PostScript
DIMMs
Additional printer memory and the PostScript option are
provided on DIMMs (Dual In-line Memory Modules). This
procedure is applicable to either option.
NOTE:
For using the ML-2150 printer with the PostScript driver,
you need to install an optional PS DIMM.
1
Turn the printer power off and unplug all cables from the
printer.
2
Remove the two screws on the rear of the printer, then
remove the control board cover.
To Next Page
Loading...
