18
1. Introduction
Control panel overview
This control panel may differ from your machine depending on its model.
There are various types of control panels.
1 Toner
LED
Shows the status of the toner (see "Status LED" on page 56).
2
(Status
LED)
Shows the status of your machine (see "Status LED" on page 56).
1
2
3
4
3
(WPS)
Configures the wireless network connection easily without a
computer (see "Wireless network setup" on page 104).
• Configuration sheet
- Press and hold this button for about 10 seconds until the
green LED blinks slowly, and release.
• Prints supplies info report / error report
- Press and hold this button for about 15 seconds until the
green LED on, and release.
• Manual print
- Press this button each time you load a sheet of paper in the
tray if you have selected Manual Feeder for Source in your
printer driver.
To Next Page
Loading...
