Samsung ML-2525W series - media and tray; SELECTING PRINT MEDIA; Guidelines to select the print media; CHANGING THE TRAY SIZE

Media and tray_11
6.media and tray
This chapter provides information on how to load print media into your machine.
This chapter includes:
• Selecting print media
• Changing the tray size
• Loading paper in the tray
• Printing on special media
• Using the output support
SELECTING PRINT MEDIA
You can print on a variety of print media, such as plain paper, envelopes,
labels, and transparencies. Always use print media that meet the guidelines
for use with your machine.
Guidelines to select the print media
Print media that does not meet the guidelines outlined in this user’s guide
may cause the following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
Properties, such as weight, composition, grain, and moisture content, are
important factors that affect the machine’s performance and the output
quality. When you choose print materials, consider the following:
• The type, size and weight of the print media for your machine are
described in print media specifications. (See "Print media specifications"
on page 44.)
• Desired outcome: The print media you choose should be appropriate for
your project.
• Brightness: Some print media are whiter than others and produce
sharper, more vibrant images.
• Surface smoothness: The smoothness of the print media affects how
crisp the printing looks on the paper.
• Some print media may meet all of the guidelines in this section and
still not produce satisfactory results. This may be the result of
improper handling, unacceptable temperature and humidity levels,
or other variables over which cannot be controlled.
• Before purchasing large quantities of print media, ensure that it
meets the requirements specified in this user’s guide.
Using print media that does not meet these specifications may cause
problems, requiring repairs. Such repairs are not covered by the
warranty or service agreements.
The amount of paper put into the tray may differ according to media
type used. (See "Print media specifications" on page 44.)
Media sizes supported in each mode
CHANGING THE TRAY SIZE
The tray is preset to Letter or A4 size, depending on your country. To
change the size, you need to adjust the paper guides.
1. With one hand press and hold the guide lock, and with the other hand,
hold the paper length guide and support guide together. Slide the paper
length guide and support guide to locate them in the correct paper size
slot.
MODE SIZE TYPE SOURCE
Simplex
printing
For details about
paper size, see
"Print media
specifications"
on page 44.
For details about
paper type, see
"Print media
specifications"
on page 44.
• tray 1
• manual tray
Duplex
printing
(Manual)
a
Letter, A4,
Legal, US Folio,
Oficio
Plain, Color,
Preprinted,
Recycled, Bond,
Archive
• tray 1
a. 75 to 90 g/m
2
(20~24 lb bond) only
1 Support guide
2 Paper length guide
3 Guide lock
4 Paper width guide
MODE SIZE TYPE SOURCE