Samsung ML-2545 - Specifications; Hardware and Environmental Specifications; Electrical Specifications and Power Consumption

Specifications_ 55
10.specifications
This chapter guides you about this machine’s specifications.
This chapter include:
• Hardware specifications
• Environmental specifications
• Electrical specifications
• Print media specifications
The specification values listed below are subject to change without notice. See www.samsung.com/printer for possible changes in information.
Hardware specifications
Item Description
Dimension Height 197 mm (7.76 inches)
Depth 389 mm (15.31 inches)
Width 358 mm (14.09 inches)
Weight Machine with consumables 7.24 Kg (15.96 Ibs)
Environmental specifications
Item Description
Noise Level
a
a.Sound Pressure Level, ISO 7779. Configuration tested: machine basic installation, A4 paper, simplex printing.
Ready mode 26 dB(A)
Printing mode 53 dB(A)
Temperature Operation 10 to 32 °C (50 to 90 °F)
Storage (unpacked) 0 to 40 °C (32 to 104 °F)
Humidity Operation 20 to 80% RH
Storage (unpacked) 10 to 80% RH
Electrical specifications
Power requirements are based on the country/region where the device is sold. Do not convert operating voltages. Doing so might damage the device and
void the product warranty.
Item Description
Power rating
a
110 volt models AC 110 - 127 V
220 volt models AC 220 - 240 V
Power consumption Average operating mode Less than 360 W
Ready mode Less than 60 W
Power save mode Less than 5.0 W
Power off mode Less than 0.5 W