2.20
S
ETTING
U
P
Y
OUR
P
RINTER
Installing the USB Driver in Windows 98/Me
1
Connect the printer to your computer using the USB cable
and turn them on. For further details, see page 2.11.
2
The Add New Hardware Wizard window appears. Click
Next.
3
Place the CD-ROM in the CD-ROM drive and check Search
for the best driver for your device and click Next.
4
Check CD-ROM drive and click Browse. Choose x:\USB
(where x is the drive letter for the CD-ROM drive) and click
Next.
5
Click Next. The USB driver will be installed.
6
When the installation is completed, click Finish.
7
When the language selection window appears, select the
appropriate language.
NOTE:
If you already installed the printer software, this window
doesn’t appear.
8
Follow the instructions on the window to complete the
printer software installation. For more details, see
page 2.17.
NOTES:
• If you want to use your printer with a parallel cable, remove the
USB cable and connect the parallel cable. Then reinstall the
printer driver.
• If your printer doesn’t work properly, reinstall the printer driver.
S
a
m
s
u
n
g
To Next Page
Loading...
