Samsung ML-3561N - Controller Specification; Electrical Specification

Service Manual
Specifications
3-2
Samsung Electronics
3.3 Electrical Specification
ITEM DESCRIPTION REMARK
Input Voltage Nominal input voltage 220-240 VAC / 110~127VAC
Input voltage range 198-254 VAC/ 99~135VAC
Nominal frequency 50/60 MHz
Frequency tolerance +3Hz
Power Consumption
Printing : 600W(average)
Sleep : under 12W
3.2 Controller Specification
ITEM DESCRIPTION
Processor(CPU) SPGPv3 400Mhz
Memory NAND FLASH 32MB
RAM : 32MB
Option DIMM module : 32, 64, 128, 256MB (SDRAM)
100Pin SDRAM DIMM (
Use only Samsung Memory Parts made specifically for this printer. )
EEPROM(NVRAM) : 4Kbyte
Emulation PCL6 : Win9x/ME/NT4.0/2000/XP
Postscript Level3 : MAC OS 8.6 ~ 9.2/10.1 ~ 10.3
PCL5e : Various Linux OS including Red Hat, Caldera, Debian, Mandrake, Slackware,
SuSE and Turbo Linux
Interface Parallel : IEEE 1284 Bidirectional Parallel
- Modes supported : Compatible,Nibble,Byte,ECP
USB(without HUB mode)
-USB 2.0 compliant -High Speed
Network Interface : - 10/100 Base TX
- 802.11b Wireless LAN
Interface switching Automatic
Interface time-out 999 seconds
Font 45 Scalable Font , 1 Bitmap Font ,Postscript 3 internal font 136
3.4 TONER Cartridge (Developer)
ITEM DESCRIPTION REMARK
Life span Starter: Up to 6,000 pages
A4 Size, @ISO 5% Coverage, SIMPLEX
Replacement : Up to 12,000 pages
Developing Non Contact Developing
Charging Conductive Roller Charging
Toner supply Method Not possible, replace the whole print cartridge.
Toner checking sensor Fitted
Ozone 0.1PPM or less
Style Single cartridge