Samsung ML-3561N - Alignment and Adjustments

Alignment & Adjustments
Service Manual
6-1
Samsung Electronics
6
6
6. Alignment and Adjustments
This chapter describes the main functions for service, such as the product maintenance
method, the test output related to maintenance and repair, DCU using method, Jam removing
method, and so on. It includes the contents of manual.
6.1 How to use EDC (Engine Diagnostic Control) Mode
6.1.1 EDC Setup
EDC(Engine Diagnostic Control, EDC will be used below) is considered to test and check whether each functions of
machinery and h/w module are normal or not. All of the test function are able to be controlled by the keys and LCD
window on the panel without any other kits. It’s developed for related engineers, not for users.
Press ’OK’key & Power On
Diagnostic Mode
Press Menu Key
"MENU" key
1
[Main Menu] "OK" key
Option Interface
[Function] Tray3 Interface
Tray3 Interface "OK" key Pass (Fail):Vx.x.x
"Arrow" key
"CANCEL" key
"CANCEL" key
"Arrow" key
[Function] Duplex Interface
Pass (Fail):Vx.x.x
Duplex Interface "OK" key
2
[Main Menu] "OK" key
Test Pattern
[Function]
Simplex Printing
Test : Simplex? "OK" key "OK" key
"Arrow" key
"Arrow" key
[Function]
Duplex Printing
Test : Duplex? "OK" key "OK" key
Printing...[PageNum]
Engine Diagnostic Control UI Flow Chart