Getting started_ 32
Linux
ITEM REQUIREMENT (RECOMMENDED)
Operating sys-
tem
RedHat
®
Enterprise Linux WS 4, 5 (32/64 bit)
Fedora 4, 5, 6, 7, 8, 9
, 10, 11, 12 (32/64bit)
SuSE Linux 10.0, 10.1 (32bit)
OpenSuSE 10.2, 10.3, 11.0, 11.1, 11.2 (32/64bit)
Mandriva 2005, 2006, 2007, 2008, 2009, 2009.1
(32/
64bit)
Ubuntu 5.04, 5.10, 6.06, 6.1
0
, 7.04, 7.10, 8.04, 8.10,
9.04, 9.10 (32/64bit)
SuSE Linux Enterprise Desktop 10, 11 (32/64bit)
Debian 4.0, 5.0 (32/64bit)
CPU
Pentium
®
IV 2.4 GHz (Intel Core™2)
RAM 512 MB (1024 MB)
Free HDD space 1 GB (2 GB)
UNIX
ITEM REQUIREMENTS
Operating sys-
tem
Sun Solaris 9,10 (x86, SPARC)
IBM AIX 5.1, 5.2, 5.3, 5.4
HP-UX 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium)
Free HDD space Up to 100 MB
INSTALLING LOCALLY CONNECTED
MACHINE’S DRIVER
Only use an USB cable no longer then 3 m (10 ft.).
Windows
You can install the machine software using the typical or custom method.
The following steps below are recommended for most users who use a
machine directly co
nnected to your computer. All components necessary for
machine operations will be installed.
1. Make sure that the machine is connected locally and powered on.
2. Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe repl
acing
“X” with the letter, which represents your
CD-ROM drive and click OK.
3. Review and accept the installation agreements in the installation win-
dow. Then, click Next.
4. Select USB co
nnection on the Printer Connection Type screen.
Then, click Next.
5. F
ollow the instructions in the installation window.
You can select the software applications in the Select Software to
Install Window.
If the printer driver does not work properly, follow the steps below to
uninstall and reinstall the driver.
a) Make sure that the machine is connected to your computer and
powered on.
b) From the Start menu, select Programs or All Programs > Sam-
sung Printers > Uninstall Sams
ung Printer Software.
c) Select the necessary option and follow the instructions in the win-
do
w.
d) After u
ninstalling the printer driver, reinstall it (see "
Installing
locally connected machine’s driver" on page 32, "Installing network
connected machine’s driver" on page 38).
Silent installation Mode (Windows only)
Silent installation mode is an installation method that does not require
any user intervention. Once you start the installation, the machine driver
and software are automatically installed on you computer. You can start
the silent installation by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command win-
dow.
Following command-line are effective and operated when com-
mand is used with /s or /S. But /h, /H or
/? are exceptional com-
mands that can be operated solely.
Mac OS X
10.5
• Intel
®
Proces-
sors
• 86
7 MHz or
faster Power
PC G4
/ G5
512 MB (1 GB) 1 GB
Mac OS X
10.6 ~10.8
• Intel
®
Proces-
sors
1 GB (2 GB) 1 GB
OPERAT-
ING SYS-
TEM
REQUIREMENTS (RECOMMENDED)
CPU RAM
FREE HDD
SPACE
To Next Page
Loading...
