Network setup_ 41
request.
• DHC
Pv6 Off: Never use DHCPv6 regardless of router request.
6. Press OK.
Manual address configuration
1. Start a web browser such as Internet Explorer that supports IPv6
addressing as a URL (See "Connecting SyncThru™ Web Service"
on page 41).
For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the
address field and press the Enter key or click Go.
2. Click Login on the upper right of the SyncThru™ Web Service web-
site.
A log-in page appears.
3. Typ
e in the ID and Password then click Login.
If it’s your first time logging into Syn
cThru™ Web Service, type in the
below default ID and password.
• ID: admin
• Password: sec00000
4. Wh
en the SyncThru™ Web Service window opens, click Settings
> Network Settings.
5. Cli
ck TCP/IPv6.
6. Enab
le the Manual Address in the TCP/IPv6 section.
IPv6 Protocol should be enabled.
7. Sele
ct the Address / Prefix and click the Add button, then the router
prefix will automatically be entered into the address field.
Enter the rest of address. (e
x: 3FFE:10:88:194::AAAA. “A” is the
hexadecimal 0 through 9, A through F.)
8. Cli
ck the Apply button.
Installing printer driver
Driver installation for network printer in IPv6 network environment is same
as TCP/IPv4 (See "Installing network connecte
d machine’s driver" on
page 38).
Select TCP/IP Port and when the list
of machines are displayed, simply
select your machine's IPv6 address.
Connecting SyncThru™ Web Service
1. Start a web browser such as Internet Explorer that supports IPv6
addressing as a URL.
2. Click Go to access the SyncThru™ Web Service.
3. Click Lo
gin on the upper right of the SyncThru™ Web Service website.
A log-in page appears.
4. Type
in the ID and Password then click Login.
If it’s your first time log
ging into SyncThru™ Web Service, type in the
below default ID and password.
• ID: admin
• Pass
word: sec00000
5. Select one of th
e IPv6 addresses (Link-local Address, Stateless
Address, Stateful Address, Manual Address) from Configuration
Report.
6. Enter the
IPv6 addresses. (ex: http://[FE80::215:99FF:FE66:7701])
Address must be enclosed in '[]' brackets.
To Next Page
Loading...
