Media and tray_ 49
Letterhead/Preprinted paper
Single-sided double-sided
Tray1
Optional tray
Face
down
Face
up
Multi-pur-
pose tray
Face
up
Face
down
• Letterhead/ Preprinted paper must be printed with heat-resistant ink that
will not melt, vaporize, or release hazardous emissions when subjected
to the machine’s fusing temperature for 0.1 second. Check your
machine’s specification to view the fusing temperature about 170°C (338
°F).
• Letterhea
d/ Preprinted paper ink must be non-flammable and should not
adversely affect machine rollers.
• Forms and letterhead should be sealed in a moisture-proof wrapping to
prevent changes during storage.
• Before you loa
d
letterhead/preprinted paper, verify that the ink on the
paper is dry. During the fusing process, wet ink can come off preprinted
paper, reducing print quality.
Used paper
When loading used paper, printed side should be facing down with an
uncurled edge at the front. If you experience problems with paper feed, turn
the paper around. Note that print quality is not guaranteed.
• Used paper must be printed with heat-resistant ink that will not melt,
vaporize, or release hazardous emissions when subjected to the
machine’s fusing temperature for 0.1 second. Check your machine’s
specification to view the fusing temperature about 170°C(338 °F).
• Used pa
per ink mu
st be non-flammable and should not adversely affect
machine rollers.
• Be
fore you load used paper, verify that the ink on the paper is dry. Dur-
i
ng the fusing process, wet ink can come off used
paper, reducing print
quality.
SETTING THE DEFAULT TRAY AND PAPER
The paper setting in the machine and driver should match to print without a
paper mismatch error.
To change the paper setting set in the machine, from the Samsun
g Easy
Printer Manager select
(Switch to advanced mode) > Device Set-
tings.
Or if your machine supports a display screen, you can set it using the
(Menu) button on the control panel.
Then, set the paper type from the Printing preferences window > Paper
tab > Paper Type (see "Opening printing preferences" on page 52).
In the control panel
Setting the paper size
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight Paper an
d press OK.
3. Press the up/down arrow to select the tray you want and press OK.
4. Press the up/down arrow to highlight Paper Siz
e and press OK.
5. Press the up/down arrow to select the p
aper size you want and press
OK.
6. Pr
ess Stop/Clear
to return to the ready mode.
Setting the paper type
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight Paper an
d press OK.
3. Press the up/down arrow to select the tray you want and press OK.
4. Press the up/down arrow to highlight Pa
per Type and press OK.
5. Press the up/down arrow to select the paper tray you want and press
OK.
6. Pr
ess Stop/Clear to return to the ready mode.
Setting the paper source
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight Paper an
d press OK.
3. Press the up/down arrow to select the paper source you want and
press OK.
4. Press Stop/Clear
to return to ready mode.
In the computer
Windows
1. Click the Windows Start menu.
2. For Windows 2000, select S
ettings > Printers.
• For Windows XP/2003, select Prin
ters and Faxes.
• For Windows 2008/Vista, select Control Panel >
Hardware and
Sound > Printers.
• For Windows 7, select Contr
o
l Panel > Hardware and Sound >
Devices and Printers.
• For Windows Server 2008 R2, select Control Panel > Hardware
> Devices and Printers.
To Next Page
Loading...
