Samsung MM-18 - Page 12

Figure 3-8
3-4 Samsung Electronics
3-6 CD Deck
1. Remove the Shaft ! .
2. Lift the P/U @ .
Note : Take extreme care not to touch the surface of lens.
If there is an alien materials, clean it with swab smeared alcohol.
3. Lift the Center-Knob # .
4. Remove the Center-Ring $ .
5. Remove the Spring-T/Table % .
6. Remove the Turn-Table (M) ^ .
7. Remove 2 screws & and then remove the Spindle-Motor * .
8. Remove the Cover-Gear ( by pushing the hook.
9. Remove the Gear (c) ) by pushing the hook.
10. Lift the Gear(b) 1 .
11. Remove the Gear(a) 2 .
11. Remove 2 screws 3 and the then remove the Feed-Motor 4 .
12. Remove the Chassis-Deck (M) 5 .
Disassembly and Reassembly
4
6
7
13
2
1
9
10
11
12
14
15
8
3
5
mm18(10) 3/23/98 2:54 PM Page 4