Samsung MM-26 - CD Deck

3-5 CD Deck
1. Remove the Shaft ! .
2. Lift the P/U @ .
Note : Take extreme care not to touch the surface of lens.
3. Lift the Center-knob #.
4. Remove the Center-ring $ .
5. Remove the Spring-T/Table % .
6. Remove the Turn-Table (M) ^ .
7. Remove 2 screw & and then remove the Spindle-Motor * .
8. Remove the Cover-Gear ( by pushing the hook.
9. Remove the Gear(c) ) by pushing the hook.
10. Lift the Gear(b) 1 .
11. Remove the Gear(a) 2 .
12. Remove 2 screws 3 and then remove the Feed-Motor 4 .
13. Remove the Chassis-Deck(M) 5.
4
6
7
13
2
1
9
10
11
12
14
15
8
3
5
3-4 Samsung Electronics
Figure 3-5
Disassembly and Reassembly