Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
DVD
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
1
Press ZOOM
button.
•
Each time the button is pressed, the
zoom level changes as follows:
3
Press ENTER
button.
ENTER ZOOM
POSITION
2625
CD Ripping Function
•
Don’t disconnected USB and AC Cord during CD-Ripping.This may cause the file damage.If you want to stop CD-Ripping during CD-
Ripping,you must press stop Key first and after the CD Stopped,then you can remove the USB device.
•
If you disconnected USB device when CD Ripping,the main unit will be power off and you may not delete the ripped file,In this case, please
connect the USB on the PC and backup the USB data on the PC first and then formate the USB device .
•
On the CD playing ,connect the USB,the CD play will be paused and will resume playing till the USB initilization finished.
•
According the different USB the initilization time maybe different.
•
When the USB memory is not enough,it will be displayed “NOT ENOUGH MEMORY”
•
DTS-CD can’t for CD Ripping.
•
Starting CD ripping within 5 seconds can’t create the CD Ripping file.
•
Ripping file is only created when CD Ripping is stopped after 5 seconds(ex. SAM_0001.MP3).
•
With external HDD,FAT format the USB can be CD Ripping,but not NTFS.The CD Ripping function of this product does not support all USB
devices. For information on the supported devices,see page 65.
•
When you use CD high speed search function,the CD Ripping can’t work.
•
when CD Ripping,CD audio can’t be out.
•
During CD Ripping,do not deal impact.If is shocked while CD Ripping,CD Ripping maybe disengage.
•
Some USB devices,CD Ripping’s time is long.
2
Load a compact
disc(Digital Audio).
1
Connect the USB.
CD
Note
OPERATION
•
Press the OPEN/CLOSE button ( ) to
open the CD door.
•
Insert a CD and press the
OPEN/CLOSE button ( ) to close the
CD door.
4
Press the STOP
button to stop
ripping
3
Press CD RIPPING
button.
•
After CD-Ripping,a directory named
“RIPPING” will be created in your
device.The file name follows the
format:”SAM_XXXX”.MP3.
.
•
If the system is either at pause or playing
state, press CD RIPPING button on the
remote control to start the ripping for the
current track.
•
Press and hold CD RIPPING button on
the remote control to start ripping the all
tracks of Disc.
•
“CD Ripping” is displayed in red and
CD RIPPING starts.
•
During CD ripping,”REC” is on.Do not
disconnect USB device while “REC” is on .
To Next Page
Loading...
