Wired network setup
146
2. Using a Network-Connected Machine
1
Download SetIP program from Samsung web site and extract it.
2
Double-click the SetIPApplet.html file in cdroot/Linux/noarch/at_opt/
share/utils folder.
3
Click to open the TCP/IP configuration window.
4
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 144) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
5
The machine will automatically print the Network Configuration
Report.
To Next Page
Loading...
