Wireless network setup
162
2. Using a Network-Connected Machine
5
On the Are you setting up your printer for the first time? screen, select
Yes, I will set up my printer's wireless network. Then, click Next.
If your printer is already connected on the network, select No, my
printer is already connected tomy network.
6
Select Using a direct wireless connection on the Select the Wireless
Setup Method screen. Then, click Next.
• Even if your computer is running Windows 7 or higher, you cannot use
this feature if your PC does not support wireless network. Set the wireless
network using a USB cable (see "Setting up via USB cable" on page 158).
• If below screen appears, press the (WPS) button from the control
panel within 2 minutes.
7
When the wireless network set up is completed, click Next.
8
Follow the instructions in the installation window.
14
Setup using Mac
Items to prepare
• Access point
• Network-connected computer
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
• USB cable
Setting up via USB cable
1
Make sure that the machine is connected to your computer and
powered on.
2
Insert the supplied software CD into your CD-ROM drive.
3
Select the CD-ROM volume that appears on Finder.
4
Double-click Install Software icon.
5
Read the license agreement and check installation agreement button.
6
Click Next.
To Next Page
Loading...
