Basic copying
60
2. Menu Overview and Basic Setup
To select from the predefined copy sizes
1
C48xW series: Make sure that the Scan to button’s LED is off.
C48xFN/C48xFW series: Select (copy) on the control panel.
2
Select (Menu) > Copy Feature > Reduce/Enlarge on the control
panel.
3
Select the option you want and press OK.
4
Press (Stop/Clear) to return to ready mode.
To scale the copy by directly entering the scale rate
1
C48xW series: Make sure that the Scan to button’s LED is off.
C48xFN/C48xFW series: Select (copy) on the control panel.
2
Select (Menu) > Copy Feature > Reduce/Enlarge > Custom on the
control panel.
3
Enter the copy size you want using the numeric keypad.
4
Press OK to save the selection.
5
Press (Stop/Clear) to return to ready mode.
When you make a reduced copy, black lines may appear at the bottom of
your copy.
To Next Page
Loading...
