Samsung MultiXpress K7 Series - Waste Toner Container Sensor; HDD (Hard Disk Drive)

3.DisassemblyandReassembly
3.3.26.WasteTonerContainersensor
1.Removetheinnercover.(Referto3.3.24.)
2.Releasethecorrespondingsensor.
•[A]:WasteTonerLevelsensor
•[B]:WasteTonerContainerDetectsensor
3.3.27.HDD(HardDiskDrive)
1.Remove2screw-capsand2screws.Thenremovethe
front-topleftcover.
2.Remove2screw-capsand2screws.Thenremovethe
ExitTray.
3.ReleasetheHDDcoverafterremoving4screws.
3-40Copyright©1995-2017SAMSUNG.Allrightsreserved.