Samsung MultiXpress K7 Series - Setting Standard Tone

4.Troubleshooting
4.7.12.SettingStandardTone
1.SettingStandardTone
•<Purpose>
-Toadjustthecolortonetothestandardsetbyfactory.
NOTE
▪Afterrstmachineinstallation,thisfunctionsmustbeexecuted.
•<Procedure>
1)LoadA4orLetterwithSEF(ShortEdgeFeeding)directionontray.
2)Select[Setting]onmainUI.
3)LoginasAdmin.
4)Select[Adjustment]->[ToneAdjustment]->[SettingStandardTone].
5)Select”OK”onconrmationwindow.
6)ThescanIDchartwillbeprintedout.
7)Loadthechartonplatenglass.(Horizontaldirection)
8)Startscan.
9)Whenthescancompletewindowappears,select“OK”.
4-195Copyright©1995-2017SAMSUNG.Allrightsreserved.