4.Troubleshooting
2)Image‘Hotoffset’problem
•Symptom:Imageattheleadingedgeofthepaperisduplicatedafter110mm.
•Cause:Thefusingtemperaturewasquitehigh.
•Troubleshooting
1)LowerthefusingtemperatureinSVCmodeuntiltheproblemdisappears.
Defaultvalueis10,anditisrecommendedtochangethevalueupto8.
-Howtochangetheplaintemperatureoffset
a)EnterSVCmode.Select‘EngineNVMRear/Write’tap.
b)Select‘PlainTemperatureoffset’menu.
c)Press‘OK’buttonafteradjustingthevalue.(1=2℃)
d)Press‘Home’buttontoexitSVCmode.
Copyright©1995-2017SAMSUNG.Allrightsreserved.4-204
To Next Page
Loading...
