340
3. Network Setup
Network environment
You can use network after connecting network cable to a corresponding port on
your machine.
You need to set up the network protocols on the machine to use it as your
network machine. You can set up the basic network settings through the
machine's control panel.
The following table shows the network environments supported by the
machine:
Item Specification
Network interface Ethernet 10/100/1000 Base-T
Network operating
system
• Windows® XP, Windows Server® 2003, Windows
Vista®, Windows® 7, Windows 8, Windows Server®
2008 R2
•Various Linux OS
• Various Unix OS
• Mac OS X 10.5 ~ 10.10
• Novell NetWare 5.x ~ 6.x
Network protocols •TCP/IPv4
• DHCP, BOOTP
• DNS, WINS, Bonjour, SLP, UPnP
• Standard TCP/IP Printing (RAW), LPR, IPP
• FTP,SMB, SMTP, WSD
• LDAP, Kerberos, 802.1x
• SNMPv 1/2/3, HTTP, IPSec
• TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP,
IPSec)
Item Specification
To Next Page
Loading...
