Using the BLE/NFC feature (Optional)
367
3. Network Setup
6
Tag your mobile device (usually located on the back of the mobile
device) over the NFC tag ( ) on your printer.
For BLE (Bluetooth Low Energy), approach to machine.
Wait few seconds for the mobile device to connect to the printer.
For some mobile devices, NFC tag might not be located at the back of the
mobile device. Check the location of the NFC antenna on your mobile
device before tagging.
Registration from the mobile device
1
Check that Bluetooth, NFC and Wi-Fi Direct enabled features are on your
mobile device and Wi-Fi Direct feature is enabled on your printer.
2
Open Samsung Mobile Print Control app.
If you do not have Samsung Mobile Print Control installed on your
cellphone, go to the application store (Samsung Apps, Play Store) on your
mobile device, and just search for download the app and try again.
3
Press the icon on the Samsung Mobile Print Control screen.
4
Select how user would like to authenticate by using NFC or BLE.
5
Select login method.
6
Type in the ID , Password, Domain, and Passcode, then click OK.
Use the same admin ID, Password, Domain as when logging in from the
machine (see "Log-in" on page 315).
To Next Page
Loading...
