Using the BLE/NFC feature (Optional)
368
3. Network Setup
• If you want to create a new user or change the password, see "Security
tab" on page 188.
• Passcode is for when the administrator chooses Two-Factor
Authentication method. You need to enter a passcode for
authentication. Password and passcode should be different. You can
select Two-Factor Authentication from the SyncThru™ Web Service,
select Security > User Access Control > Authentication >
Authentication Method > Options button > Login Method > Two-
Factor Authentication.
7
Tag your mobile device (usually located on the back of the mobile
device) over the NFC tag ( ) on your printer.
For BLE (Bluetooth Low Energy), approach to machine.
Wait few seconds for the mobile device to connect to the printer.
For some mobile devices, NFC tag might not be located at the back of the
mobile device. Check the location of the NFC antenna on your mobile
device before tagging.
8
Registration complete message appears on the printer’s touch screen.
To Next Page
Loading...
