Using the BLE/NFC feature (Optional)
373
3. Network Setup
5
Tag your mobile device (usually located on the back of the mobile
device) over the NFC tag ( ) on your printer.
Wait a few seconds for the mobile device to send a job to the printer.
For some mobile devices, NFC tag might not be located at the back of the
mobile device. Check the location of the NFC antenna on your mobile
device before tagging.
6
The printer starts printing.
Scanning
1
Check that Bluetooth, NFC and Wi-Fi Direct enabled features are on your
mobile device and Wi-Fi Direct feature is enabled on your printer.
2
Open Samsung Mobile Print app.
If you do not have Samsung Mobile Print installed on your cellphone, go
to the application store (Samsung Apps, Play Store, App Store) on your
mobile device, and just search for download the app and try again.
3
Select scan mode.
4
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 48).
If necessary, change the scan option by pressing the .
To Next Page
Loading...
