Samsung MultiXpress M5370 Series - Adjustment

4.Troubleshooting
CodeDisplayedNameAccess
05-0100DocumentRegiClutchStart/Stop
05-0110DocumentMotorForwardStart/Stop
05-0111DocumentMotorBackwardStart/Stop
05-0120Documentwidth1SensorHigh/Low
05-0130DocumentPickupMotorForwardStart/Stop
05-0131DocumentPickupMotorBackwardStart/Stop
05-0140DocumentPickupRollerDetectSensorHigh/Low
05-0210DocumentJigTestLowSpeedSimplexStart/Stop
05-0230DocumentJigTestHighSpeedSimplexStart/Stop
4.5.5.4.Adjustment
PrintAdjustment
•Diagnostics>Adjustment>PrintAdjustment>AutomaticAdjustment
PurposeTocalibrate/adjustthelengthsofvertical&horizontalimageandimagepositionautomaticallyin
printengine.
OperationProcedure
1)Press“PaperSupply”buttonandselectatray.
2)Press“PaperSize”buttonandselectapapersizeofthepreviouslyselectedtray.
3)Press“Print”button.Atestpatternwillbeprintedout.
4)Placetheprintedpatternonplaten.
•Thewords“frontside”onthechartfacetheglass
•Thearrowsfaceleftedgeoftheplaten
•Press“Scan1”
5)Press“OK”button.Automaticscanningwilloccur.
6)Placetheprintedpatternonplaten.
•Thewords“backside”onthechartfacetheglass
•Thearrowsfaceleftedgeoftheplaten
•Press“Scan2”
7)Press“OK”button.Automaticscanningwilloccur.
8)Thesystemwillautomaticallycalculatethepropervaluebasedonscanningresultofthe
testpattern.
9)Thenewvaluesaresettothesystem.
4-58Copyright©1995-2016SAMSUNG.Allrightsreserved.