Samsung MultiXpress M537x series - Scanner Diagnostics

4.Troubleshooting
4.5.5.3.ScannerDiagnostics
ShadingTest
•Diagnostics>ScannerDiagnostics>ShadingTest
NOTE
AfterreplacingtheDSDFboard,DSDFunitoradjustingtheDSDFunit,ShadingTestmustbeexecuted.
PurposeTocheckqualityofscannedimages,especiallydefectinopticaldevices,includinglens,mirror,
lamp,andetc,aresuspected.
OperationProcedure[ForPlatenUnit]
Press"ShareandPrintreport“toseeifthecurrentshadingvalueiscorrect.
Mono,red,green,bluegrayshadingvalueswillbeshownontheprintedreport.
Whenthepreviousshadingvalueisneeded,press“PrintLastShadeReport”.
[ForDSDFUnit]
Press"ShareandPrintreport(ADF)“toseeifthecurrentshadingvalueiscorrect.
Mono,red,green,bluegrayshadingvalueswillbeshownontheprintedreport.
Whenthepreviousshadingvalueisneeded,press“PrintLastShadeReport(ADF)”.
VericationChecktheresultontheshadingreport.
IftheresultisnotOK,cleantheCCDMglass.
Copyright©1995-2013SAMSUNG.Allrightsreserved.4-55