Samsung MultiXpress M537x series - Finisher Failure #H2-5001. Turn off then On, after Checking Finisher; Finisher Failure #H2-5002. Turn off then On, after Checking Finisher

4.Troubleshooting
►ErrorCode
H2-5001
H2-5002
H2-5096
►Errormessage
FinisherFailure#H2-5001.Turnoffthenon,aftercheckingnisher
FinisherFailure#H2-5002.Turnoffthenon,aftercheckingnisher
FinisherFailure#H2-5096.Turnoffthenon,aftercheckingnisher
►Symptom
MainPaddleoperationisabnormal.(Paddlehomefailure/Paddlemovefailure)
►Troubleshootingmethod
1)IstheMainPaddleoverrunsduringtheoperation?
a)CheckifthePaddlehomesensoractuator(SJ103302)isabnormality.
b)Checkiftheconnector(SJ108310)ofPaddlehomesensor(S4)isdisconnected.
c)Checkiftheconnector(SJ108310)J8onthenishermainboard(JC81–07242A)isdisconnected.
d)Checkifthereiscontinuityintheharness,andifnotreplacetheharness(JR108310),replaceasisnecessary.
e)ReplacethenisherPaddlehomesensor(S4).
f)ReplacetheFinishermainboard(JC81–07242A).
2)IsthePaddleMotor(M3)working?
a)Checkiftheconnector(JR108320)ofPaddlemotor(M3)isdisconnected.
b)Checkiftheconnector(JR108320)J5onthenishermainboard(JC81–07242A)isdisconnected.
c)Checkifthereiscontinuityintheharness,andifnotreplacetheharness(JR108320),replaceasisnecessary.
d)ReplacethePaddlemotor(M3).
e)ReplacetheFinishermainboard(JC81–07242A).
3)Checkifthegears(SJ103308)ofPaddlemotor(M3)areassembledcorrectly.
4)Checkifthetoothofgears(SJ103308)arebroken.Ifitisdefective,replacethebrokengears(SJ103308).
4-120Copyright©1995-2013SAMSUNG.Allrightsreserved.