Samsung MultiXpress M537x series - Finisher Failure #H2-5012. Turn off then On, after Checking Finisher; Finisher Failure #H2-5013. Turn off then On, after Checking Finisher

4.Troubleshooting
►ErrorCode
H2-5012
H2-5013
H2-5101
►Errormessage
FinisherFailure#H2-5012.Turnoffthenon,aftercheckingnisher
FinisherFailure#H2-5013.Turnoffthenon,aftercheckingnisher
FinisherFailure#H2-5101.Turnoffthenon,aftercheckingnisher
►Symptom
Staplerheadclinchingmotorisnotworkingproperly.
►Troubleshootingmethod
1)IstheHeadofStapler(JC81-03475B)opened?
a)Replacestaplercartridge(JC81-03481A).
b)Checkiftheconnectors(SJ108310)ofstaplerheadaredisconnected.
c)Checkiftheconnector(SJ108310)P7onthenishermainboard(JC81–07242A)isdisconnected.
d)Checkifthereiscontinuityintheharness,andifnotreplacetheharness(SJ10-8310),replaceasisnecessary.
e)Replacethestaplerunit(SJ103140).
f)ReplacetheFinishermainboard(JC81–07242A).
2)Replacethestaplerunit(SJ103140).
4-130Copyright©1995-2013SAMSUNG.Allrightsreserved.