Samsung MultiXpress M537x series - Sx-XXXX Type Error Code; The Clock Became Initial Time. Set a Time Again; HDD System Failure: #S1-2411. Turn off then On. Call for Service if the Problem Persists

4.Troubleshooting
4.6.6.Sx-xxxxtypeerrorcode
►ErrorCode
S1–1313
►Errormessage
Theclockbecameinitialtime.Setatimeagain.
►Symptom
Savedtimeisinvalid.
►Troubleshootingmethod
1)Setupthetimeandrebootthemachine.
a)Select“MachineSetup”ontouchscreen.
b)Select“GeneralSetting”.
c)Select“DateandTime”andsetthetime.
2)Iftheproblempersists,checkthefollowing.
a)Removetherearcover.
b)Measurethevoltageofthebattery.Ifthebatteryisnormal,themeasuredvalueisover3V .
3)Ifthebatteryisnormal,replacethemainboard.
►ErrorCode
S1–2411
►Errormessage
HDDSystemFailure:#S1-2411.Turnoffthenon.Callforserviceiftheproblempersists.
►Symptom
HardDiskisnotinstalledinthemachine./HardDiskisdefective.
►Troubleshootingmethod
1)CheckiftheHDDisinstalledcorrectly.
a)Removetherearcover.
b)CheckiftheHDDcableisconnectedcorrectly.
2)Iftheproblempersists,replacetheHDD.
Copyright©1995-2013SAMSUNG.Allrightsreserved.4-161