110
4. Copying
Basic copy
This is the usual procedure to copy your original documents.
1
Tap Copy from the home screen or Apps.
2
Place the originals face up in the DSDF or place a single original face
down on the scanner glass and close the DSDF (see "Loading originals"
on page 46).
3
Adjust the settings on the Copy tab and More tab.
4
Enter the number of copies desired on the numeric keypad (or +, -
button) on the control panel, if necessary.
5
Tap , (Start ) from the control panel to begin
copying.
To cancel the current copy job, tap Stop > tap Job Status on the
control panel. Then delete the job you want (see "Job Status" on page 35).
To Next Page
Loading...
