Samsung MultiXpress M537x series - Using the Quick Copy Menu

111
4. Copying
Using the Quick Copy menu
The Quick Copy menu allows you to quickly set common copy options without
having to open a lower level menu or another tab. However, this menu does not
offer every copy option available.
1
Tap Quick Copy from the home screen or Apps.
2
Place the originals face up in the DSDF or place a single original face
down on the scanner glass and close the DSDF (see "Loading originals"
on page 46).
3
Adjust the settings (Paper Source, Reduce/Enlarge, Original
Orientation, Darkness, Duplex, N-UP, Multi Bin
a
, Collation, Staple
a
).
4
Enter the number of copies desired on the numeric keypad (or +, -
button) on the control panel, if necessary.
5
Press Start( ) on the control panel to begin copying.
To cancel the current copy job, tap Stop > tap Job Status on the
control panel. Then delete the job you want (see "Job Status" on page 35).
a. Option device(Finiher) only.