Understanding the fax screen
136
6. Scan & Send (Faxing)
Adjusting the brightness
You can adjust the brightness level of a copy if needed for easier reading if the
original contains faint markings or dark images. Adjust the brightness level
using the slider. This feature allows you to print dark images lighter, or light
images darker.
Tap Darkness to show the slider control.
Selecting the color mode
Use one of the following options to use for the scan.
• Mono: Use black and white (1-bit per pixel).
• Gray : Use grayscale (8-bit per pixel).
• Color: Use color (24-bit per pixel, each of the RGB channels has 8 bits).
Selecting the original type
Use the original type setting to improve copy quality by selecting the
appropriate document type for a copy job.
• Text: Use if the original is mostly text and very few or no images.
• Text/Photo: Use if the original is a mix of text and images.
• Photo: Use if the original is mostly or exclusively images.
Sub menu (Action overflow)
• Add to My Program: Add an app to my program list. With this feature, user
can set default settings, destinations required for each program. Also can set
default options as Auto Launch, add shortcut to Home.
• Search: Search for a desired options.
• Build Job : This option can be turned on or off. When this option is on:
After the scanning is finished, the Scan More window appears to ask if you
want to scan another page. If you select Yes, then you can scan another
page in the current job. If you select No, then the scanning process is
completed and the remainder of the job is performed.
• Attach File Only : Allows you to attach a file to your message. You can use
this option to quickly send one or more files from the hard disk drive (BOX)
of the machine to an SMB, FTP, Email, Box, USB.
To Next Page
Loading...
