24
1. Introduction
Control panel
14
Control Panel
When you use the display screen, use your finger only. The screen may be
damaged with a sharp pen or anything else.
1
Display screen
Shows the current machine status and prompts
during an operation. You can set menus easily
using the display screen.
2 Motion sensor hole Motion sensor.
3 a. Power LED Shows the power status of your machine.
b. (Power /
Wakeup) button
Turn the power on or off. When the blue LED is on,
the machine is powered on and you can use it. If
you turn the machine off, press this button for
more than two seconds. Then, confirmation
window appears.
1
2
3
4
4
Status LED
Shows the status of your machine (see
"Understanding the LEDs" on page 27).
To Next Page
Loading...
