Samsung MultiXpress M537x series - Page 245

Understanding display messages
245
9. Troubleshooting
Replace with new
imaging unit
The indicated imaging
unit has almost
reached its estimated
imaging unit life
a
.
Replace the imaging unit
for the best print quality
when this message
appears. Using a imaging
unit beyond this stage can
result in printing quality
issues (see "Replacing the
imaging unit" on page
200).
Replace with new fuser
unit
The life of the fuser unit
expires totally.
Replace the fuser unit with
a Samsung-genuine fuser
unit, call for service.
Replace with new
Transfer roller
The life of the transfer
roller expires totally.
Replace the transfer roller
with a Samsung-genuine
transfer roller, call for
service.
Replace with new tray
[number] pickup roller
The life of the tray
pickup roller expires
totally.
Replace the tray pickup
roller with a Samsung-
genuine pickup roller, call
for service.
Scanner locked or
another problem
occurred
The CCD (Charged
Couple Device) lock
has been locked.
Unlock the CCD lock . Or
turn the machine off and
back on again. If the
problem persists, call for
service.
Message Meaning Suggested solutions
Scan System Failure:
[error number]. Turn off
then on
There is a problem in
the scan system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Sensor Failure: [error
number]. Turn off then
on. Call for service if the
problem persists
There is a problem in
the sensor system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Shake [color] toner
cartridge
Small amount of toner
is left in the indicated
cartridge.
• You may temporarily
increase the printing
quality by
redistributing the toner
(see "Redistributing
toner" on page 194).
• If the problem persists,
call for service.
Staple cartridge is empty.
Replace it
The staple cartridge
has reached the end of
its lifespan.
This message appears
when the staple cartridge
is completely empty.
Replace the staple
cartridge.
Message Meaning Suggested solutions