26
1. Introduction
Turning on the machine
Keep in mind that you should use the power cord supplied with the
machine. Otherwise, it can cause damage or fire to the machine.
Connect the machine to the electricity supply first.
You can also turn the machine on pressing the (Power/Wakeup)
• Some parts inside of the machine may be hot when power is on, or after
printing. Be careful not to burn yourself when working inside the
machine.
• Do not disassemble the machine when it is turned on or plugged in.
Doing so may give you an electric shock.
• If you turn the machine off directly using the power switch, it could cause
the hard disk problem in the machine.
1
2
3
To Next Page
Loading...
